1 / 3
BNC Picnic Table Anchor
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Female to Female BNC adaptor on a picnic/patio anchor
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 6
- Makes
- 0
- Views
- 122
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Quick little print to put an BNC female to female on a anchor deck/patio/picnic table. This makes my POTA activations easier when im on a picnic table. I have added a ground point for a counterpoise. I didnt put any build guide since this is pretty straight forward. I used a scrap of wire i cut off of a resistor. Put it in the channel in one of the prints and bend them out of the holes. Tighten the adapter and ground screw on them.
Parts:
Anchor:https://www.amazon.ca/dp/B0FK1GF8QN
BNC Adaptor: https://www.amazon.ca/dp/B08139D4XS
Print at 100% infill.