1 / 2
Flashforge Creator 5 buildplate press-fit handle
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Single-piece, press-fit build plate handle for the Flashforge Creator 5. No hardware, no assembly.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 28
- Makes
- 0
- Views
- 70
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A simple handle for the Flashforge Creator 5 build plate. It’s one printed part with no screws, inserts, or extra pieces.
Slide the edge of the plate into the slot and press firmly until it snaps into a snug fit. The tolerance is tight enough that it holds without any play.
Material
I printed mine in PA12-CF and it works well. Because the handle sits on a heated plate, avoid PLA and PETG, which can soften and lose their grip. Use ABS, ASA, or a higher-temp material like PA or PC.