Shelf Pin Jig 5 mm, 37 mm setback
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Drilling strip for 5 mm shelf pins, 32 mm system, 37 mm setback. 256 mm long.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 11
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
An edge-fenced drilling strip for 5 mm shelf pins on the 32 mm system, with a 37 mm setback from the edge. Put a pin in the last drilled hole to index the next run. Pairs with our shelf pin.
Print settings: PETG, 5 walls. Bed size: this part is 256 mm long, so it needs a 256 mm bed (Bambu-size). It will not fit a Prusa MK4 (250 mm).
Before you print: measure your original part first and print a quick fit test. Not for parts carrying load, pressure, heat or electricity.
Licence: CC BY-NC-ND 4.0, personal non-commercial use.
Second file: a 192 mm version with 50 mm setback and 6 holes, for 250 mm beds such as the Prusa MK4.
Need a part that doesn't exist yet? I design custom replacement parts from your photos and measurements, from €39. See my profile for details. This model and its files stay free here.