1 / 5
Pumpkin Spider Surprise – Mechanical Halloween Automaton — image 1
1 / 5

Pumpkin Spider Surprise – Mechanical Halloween Automaton

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Turn the stem to reveal a hidden spider! A fully 3D-printed Halloween automaton with moving legs and self-opening doors.

Rating
0 / 5
Likes
1
Downloads
5
Makes
0
Views
38
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

This mechanical pumpkin has been an idea of mine for quite a while. The Halloween contest gave me the push to bring it to life, and AI assistance helped me turn my plans into a working model within the short 15-day contest window.

Since AI-assisted designs are not eligible for the contest, I’m sharing it here outside the competition. I didn’t want to keep the finished model to myself—especially after printing, assembling and testing it, and seeing the mechanism work!

The files and illustrated assembly guide are available for you to build your own. Have fun printing, and I’d love to see your makes!

Pumpkin Spider Surprise – Mechanical Halloween Automaton

Turn the stem and reveal the spider! Both mouth shutters open as the spider emerges and spreads its legs. Keep turning to retract it and close the pumpkin again. The cut-out grin and teeth are integrated into the shutters.

One complete revolution produces one opening and closing cycle. A crank, connecting rod, cam tracks and shutter links coordinate the entire movement.

All shafts, pins, caps and hinges are 3D printed. No motors, springs, screws or metal bearings are required. Adhesive secures the stationary mounting feet to the base after testing.

A detailed illustrated assembly guide in English is available in the downloads: Pumpkin_Spider_Assembly_Guide_EN.pdf.

The PDF includes numbered renders, pin insertion directions, the complete assembly sequence and a gluing map. The instructions below are a quick reference.

Printing

  • Suggested starting point: standard PLA, 0.4 mm nozzle and 0.20 mm layers.

  • Mechanical parts: approximately 4 perimeters and 30% infill. Print pins, shafts and retaining caps solid where possible.

  • Base size: 190 × 246 mm. Check your usable build area and allow extra room for a brim.

  • Use supports where needed, especially under carriage arms, shell openings, hinge lugs, shutter levers and internal lid overhangs. Inspect the sliced preview.

  • Print the leg banks with their flat top faces on the bed and the followers facing up.

  • Print fit-test coupon 20, one pin 16 and one cap 19 first. Remove support residue, strings and elephant’s foot from moving interfaces.

These are starting recommendations, not a calibrated print profile. This model is assembled from separate prints; it is not print-in-place.

Separate parts can be printed in different colours without a multi-material system.

Parts list

Print the following quantities for one complete model: 43 assembly pieces, plus one optional fit-test coupon. There are 29 different STL files.

STL file

Quantity

01_Base

1

02_Rail_right

1

03_Rail_left

1

04_Carriage

1

05_Cam_right

1

06_Cam_left

1

07_Legs_right

1

08_Legs_left

1

09_Spider_body

1

10_Crank

1

11_Connecting_rod

1

12_Lower_shaft

1

13_Upper_shaft

1

14_Pumpkin_shell

1

15_Pumpkin_lid

1

16_Pin_14mm

5

17_Pin_22mm

1

18_Pin_20mm

2

19_Pin_cap

8

20_Fit_test

1 optional test print

21_Bearing_front

1

22_Bearing_rear

1

23_Stem_handle

1

24_Crank_keeper

1

25_Door_right

1

26_Door_left

1

27_Door_link

2

28_Hinge_pin_60mm

2

29_Hinge_cap

2

Quick assembly guide

Right and left refer to the view from the front, facing the pumpkin mouth. Dry-assemble everything first and keep all joints free of adhesive.

  1. Rails and carriage: Align rails 02/03 parallel and slide carriage 04 onto their front ends. Body mounting pegs face up.

  2. Connecting rod: Place one eye of 11 below the central carriage lug. Insert pin 17 (22 mm) from below and cap 19 on top. Assemble this joint off the base.

  3. Crank and lower shaft: Fit crank 10 onto the large hexagon of 12 from below, with its raised outer lug facing down. Fit keeper 24 from below, flush with the shaft end.

  4. Crank joint: Place the free eye of rod 11 below the outer crank eye. Insert pin 16 (14 mm) from below and cap 19 on top.

  5. Leg banks: Fit 07 on the right and 08 on the left side of 04, with integrated followers facing down. Use two pins 18 (20 mm), inserted from above, with caps 19 below.

  6. Bearing: Fit halves 21/22 around the round section of 12, with feet down and the large shaft collar resting on top of the bearing.

  7. Shutters: With shell 14 off the base, fit 25/26 between its hinge lugs. Curved faces point forwards; short lever arms point inwards. Insert pins 28 from above and caps 29 below.

  8. Shutter links: Attach one link 27 to each shutter lever using pin 16 from below and cap 19 on top. Leave the other ends free.

  9. Basic mechanism: Place the rail, carriage, leg, crank, rod, shaft and bearing assembly on the locating pegs of base 01. Extend the carriage with the crank pointing forwards. Leave cam tracks 05/06 off.

  10. Shell first: Seat shell 14 on its three locating pegs. Keep body 09, upper shaft 13 and lid 15 off for access.

  11. Cam tracks second: Insert 05 and 06 individually through the top lid opening. Tilt and align them inside, then seat them on the four outer base pegs with cam slots up and tall supports outwards. Engage the leg followers in the slots. The shell will not fit properly if you install 05/06 first.

  12. Align shutter links: Fully extend the carriage and swing both shutters out until the free eyes of 27 align with the raised rear carriage lugs. The shutters will be open approximately 108 degrees.

  13. Connect to the carriage: Secure both links with pins 16 from below and caps 19 on top. Slowly check a complete revolution without forcing anything.

  14. Spider body: Fit 09 onto the two carriage pegs, with the head facing forwards towards the mouth.

  15. Upper shaft and lid: Fit 13 onto 12, lower lid 15 over the shaft and seat it in the shell, then fit stem handle 23. Keep the lid and handle removable.

  16. Test, then glue: Check several complete opening and closing cycles. Make sure the legs clear the shutter hinges and all joints move freely. Only then glue the stationary mounting feet as described below.

Gluing

After a successful dry test, secure these stationary parts to base 01:

  • Rails 02/03: four feet.

  • Cam tracks 05/06: four feet.

  • Bearing halves 21/22: four feet.

  • Pumpkin shell 14: three feet.

Apply a small amount of adhesive suitable for your filament only between the feet and the base.

Keep the carriage, sliding surfaces, cam slots, followers, shafts, joints, shutters and links free of adhesive. Do not glue the removable lid or handle. Allow the adhesive to cure fully, then test again slowly.

Download the illustrated English PDF for the detailed assembly views and gluing map.

I have printed, assembled and function-tested a physical prototype. Depending on your printer, minor fitting may still be needed. Do not lift the model by the stem.

I’d love to see your makes, colour combinations and Halloween displays!