Heewing T2 Cruza – Cooling Air Vents
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Heewing T2 Cruza Air Vents
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 3
- Makes
- 0
- Views
- 12
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
Heewing T2 Cruza – Cooling Air Vents
Description:
The Heewing T2 Cruza has barely any airflow through the fuselage, which can cause heat buildup around the ESC, battery and FPV gear. These air vents fix that.
Each vent slides into the fuselage from the inside and sits flush in the cutout. Just mark the spots, cut the openings at a 45° angle, and slide the vents in.
Features
Improves airflow and cooling inside the fuselage
Slide-in design, no glue or screws needed (add a drop of CA if you want extra security)
Simple install with just a hobby knife
Light and quick to print
Installation
Decide on the vent positions and mark them on the fuselage.
Cut out the openings at a 45° angle.
Slide the vents into the cutouts.
Notes
Test-fit before gluing and trim the cutouts slowly, since foam is easy to over-cut.
Happy flying! If you print and install these, feel free to post a make.
