Roseta inquisitorial porta telefonos
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
"A compact, print-in-place foldable phone stand designed to go anywhere. Prints with no assembly required!"
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 17
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
# 📱 Foldable & Portable Phone Stand (Print-In-Place)
A ultra-lightweight, compact, and fully foldable phone stand designed to be printed in a single piece. Perfect for carrying in your pocket, backpack, or keeping on your desk.
Supports both Portrait and Landscape modes for smartphones.
---
### 🔗 Reference Models / Inspirations:
This design takes inspiration and concepts from these great community models:
* [Print-in-Place Foldable Phone Stand](https://makerworld.com/es/models/783717-print-in-place-v1-4-foldable-and-portable-phone-st#profileId-1222960)
* [Yet Another Inquisitorial Rosette](https://makerworld.com/es/models/1185746-yet-another-inquisitorial-rosette#profileId-1507957)
---
### ✨ Key Features:
* 🚀 100% Print-In-Place mechanism: Foldable structure with zero complicated assembly.
* 📐 Dual Orientation: Holds your phone vertically or horizontally securely.
* 🪶 Ultralight & Pocket-Sized: Folds completely flat for maximum portability.
---
### 🖨 Recommended Print Settings:
* Layer Height: 0.16mm - 0.20mm
* Wall Loops / Lines: 2 - 3
* Infill: 15% - 20% (Gyroid or Grid recommended)
* Supports: ⚠ Required on the ring/loop area (Ensure supports are enabled specifically for the hanging loop/argolla section to guarantee a clean overhang).
* Material: PLA, PLA+, or PETG
---
### 💡 Tolerance & Troubleshooting Tips:
Since this is a Print-in-Place design with moving parts:
* If parts are stuck after printing: Gently apply pressure to break the initial friction. If it stays fused, slightly decrease your slicer's XY Contour Compensation (try -0.05mm to -0.15mm).
* If parts feel too loose: Increase XY Contour Compensation (try +0.05mm).
* First Layer Adhesion: Ensure your build plate is clean for the best bed adhesion on moving hinges.
---
⭐ If you like this model, please leave a Like, Share your make, or give it a Boost! It helps a lot to keep creating free designs! 🚀