1 / 11
ASCENT - Whale Breaching into a Flock of Birds — image 1
1 / 11

ASCENT - Whale Breaching into a Flock of Birds

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A humpback breaches as its feathered back lifts away into a rising flock of birds. One piece, 231 mm, metal or silk PLA.

Rating
0 / 5
Likes
9
Downloads
15
Makes
0
Views
107
Reviews
0

Updated at source:

Model information

Category
Sculptures
License
Standard Digital File License

ASCENT

A humpback whale bursts out of the sea. As it rises, the skin on its back turns into overlapping feathers, the feathers peel away on the wind, and a few lengths above the water they have become a flock of birds that arcs over its head and carries the leap into the sky. ASCENT is an original decor sculpture, sculpted to look like cast bronze when printed in metal or silk PLA.

Highlights

  • One single piece, 231 mm tall, no assembly or glue

  • A true-to-life humpback: knobbed tubercles on the head, barnacle clusters on the chin, 26 throat pleats, eye with lid, twin blowholes, rake scars and long flippers with the scalloped leading edge humpbacks are known for

  • 27 individually sculpted birds, each in its own flight pose, with a real head and beak, layered wing feathers and a forked tail

  • About 50 feathers lifting off the whale and the wind streams, so you can follow the whole transformation from skin to feather to bird

  • Sculpted sea: water climbing the body and pouring off in streaked sheets, a ring of churning foam, ripples and a wave pushed out by the breach

  • Oval base with engraved ring and name

  • Print profiles for the X2D with 0.4 and 0.2 nozzles, plus a dual-nozzle profile with Support for PLA interface for clean support removal

Print profiles

  • X2D 0.4 nozzle, 0.16 mm layers (recommended): about 15.3 h, 300 g PLA

  • X2D 0.4 nozzle, 0.12 mm layers (fine detail): about 17.8 h, 262 g PLA

  • X2D 0.2 nozzle, 0.12 mm layers (finest bird faces): about 45 h, 234 g PLA

  • Dual nozzle (X2D/H2D), 0.16 mm layers, Support for PLA interface: about 24.8 h, 351 g PLA + 41 g Support for PLA/PETG (the model is turned on the plate so both nozzles reach it)

All profiles were sliced and checked in Bambu Studio. Times are Bambu Studio estimates.

Size and printer fit

  • Height 231 mm, footprint 225 x 165 mm

  • Fits 256 mm class printers (X1, P1, A1, H2D, X2D and similar)

  • Printers limited to 220 mm height: scale the model to 94%

Printing tips

  • Supports are required: tree supports, with "on build plate only" turned OFF (the birds and the raised flipper need support from the whale and the base)

  • 2 walls and 15% infill are enough; the base gives the piece its weight

  • Remove supports slowly, starting from the top of the flock and working down; the dual-nozzle profile makes this much easier

  • Metal-filled PLA looks best with a slightly slower outer wall

Finishing ideas

  • Bronze or copper silk PLA looks finished straight off the plate

  • For a real patina, print in black or dark brown and dry-brush the whale's tubercles, the feathers and the foam with gold or bronze wax

  • A thin coat of clear wax adds depth to the throat pleats and the feather grooves

If you print ASCENT, please post a Make: I would love to see it in your home. A Like helps me keep designing free models like this one.

NEW - Bambu Lab H3C: ASCENT_H3C.3mf puts each colour on its own PrintTool (almost no purge), re-centred on the 330 x 320 mm H3C plate, with the official H3C machine G-code. Sliced in Bambu Studio 2.09.

Tags