1 / 2
Nextion NX8048T050 5” display frame
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a panel-mountable frame for the Nextion NX8048T050 display or other 5” displays.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 17
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
The frame can be installed in an enclosure with a wall thickness of 1.5 mm or greater. Mounting requires a 2 mm wood screw approximately 14 mm in length, eliminating the need for a nut or a soldered-in thread.
Print settings are entirely a matter of preference. You could use PLA, but PETG or ABS are recommended for a more durable and stronger structure. Layer height is also a personal choice; I printed mine using PETG with a layer height of 0.2 mm.