Batwing Fan
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
It's a fan to cool you down - Halloween style! Sure, the time isn't right, but who doesn't want to chill out with bats?
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 3
- Makes
- 0
- Views
- 42
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Autumn & Halloween
- License
- Creative Commons — Attribution — Share Alike
This is a real folding fan whose blades are batwings! Closed, it's a slim black and ornage stick; opened it spreads into a scalloped batwing with a little bat's head sitting at the hinge. It cools you down, folds flat in a pocket, and has a loop so you can wear it on your wrist.
***ASSEMBLY***
1) Push the pivot pin up through the lanyard rib (the rib on plate A with an extra hole (make sure the pivot pin goes through the top hole)), then through the other ribs in this order (always pin/button thingie side up): A, B, A, B, A, B, A, B, A. Each rib's little pin/button thingie must drop into the curved slot of the rib above it.
2) Press the bat-head cap onto the top of the pivot pin
3) Close the fan, then open it by swinging the top rib counter-clockwise
***PRINT SETTINGS***
Print without supports and with 0.2 mm layers, 3 perimeters, and 20% infill. If a rib bows, add a brim.