"The Snail" Titan Aero Fan Duct V2.0.1
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an update 2.x of my Titan Aero Fan duct.
- Rating
- 0 / 5
- Likes
- 17
- Downloads
- 160
- Makes
- 1
- Views
- 1,252
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is an update 2.x of my Titan Aero Fan duct. It should work on every printer with every Titan Aero mount where it is mounted in the same position as mine (check Fotos)
Features/Design concept:
- It's not covering the hotend so you can see what's printing
- Very good cooling (left and right)
- Adjustable height (+/- 1mm)
It should work with any mount as it is fastend directly to the aero's heatsink
If you like the design and use it: PLEASE, LEAVE A TIP!Mounting bits:
for the fan duct : 2x M3 Washers and 2x M3x35mm or longer screws
for the radial fan : 2x M3 Washers and Nuts and 2x M3x20 screws
Print instructions
Category: 3D Printer Parts Print Settings
Printer: Geeetech A10
Rafts: No
Supports: Yes
Resolution: 0.2
Infill: 25%
Filament: NuNus PETG
Notes:
Update 03.01.2019: V2.0.1 solves a little bug where the bridging at 17mm failed in certain scenarios.