Hitch adapter for VSETT 9+
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€8.90 – €10.88 net (excluding VAT)
For file: 2026-10-07-vsett-trailer-hitch-BOTH-PARTS_0.4n_0.25mm_PLA_COREONE_7h11m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €9.89 excluding VAT (range midpoint).
- Weight reported by the author
- 180 g
- Print time reported by the author
- 7.19 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Adapter allowing to connect a Filmer hitch to VSETT 9+ electric scooter
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 19
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This adapter was created to attach a bicycle hitch to a VSETT 9+ electric scooter
THE HITCH
This part was modeled for a Hitch by Filmer (https://www.filmer.de/Anhaengerkupplung-fuer-Fahrrad/46910)
You can buy thos hitch at:
https://www.pollin.at/p/filmer-fahrrad-anhaengerkupplung-850808?etcc_med=pvgl&etcc_ori=idealo.at&et_cmp_seg2=pvgl&channelid=psm
THE CART
In my setup I used Coleman Camping Wagon (https://www.otto.de/p/coleman-bollerwagen-coleman-bollerwagen-handwagen-CS0CKU06J/)
PRINTING IT
I printed this in generic PLA using the orientation which prevents layer adhesion from compromising the structural integrity of the part and to requiring the least amount of support. The parts are properly placed in the 3mf file (or the bgcode file).
ATTACHING IT TO SCOOTER
To attach it to electric scooter you'll need a set of:
m6x50 screws - x6
m6x20 washers - x12
m6 security bolts
m8x100 screw with smooth shank - 1x = acting as an an axle
m8 security bolt
TESTING IT
Initially I tested this part attaching the part on a beam and then hanging my full body weight onto it (85kg). It passed with flying colors.
In the second test I pulled around 40kg in a cart over rough terrain. If passed with flying colors.
WARNING
Camping carts are usually not designed to be pulled by an electric scooter in terms of speed and distance covered. Using them in this fashion might cause premature wear. Also at higher speeds the cart might become unstable. So be smart and stay safe!