1 / 5
120 mm Fan Bracket on a PCIe Slot Cover (GPU Backplate Cooling) — image 1
1 / 5

120 mm Fan Bracket on a PCIe Slot Cover (GPU Backplate Cooling)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Replaces a PCIe slot cover and holds a 120 mm fan flat in the gap between the GPU and the CPU cooler.

Rating
0 / 5
Likes
1
Downloads
5
Makes
0
Views
25
Reviews
0

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution

A bracket that replaces a standard PCIe slot cover and holds a 120 × 25 mm fan lying flat in the gap between the graphics card and the CPU cooler, for example to cool the GPU backplate.

Size: 184 × 150 × 16.9 mm.

Why is the slot cover narrower?

The slot cover is intentionally 5 mm narrower than a standard one, trimmed on the GPU side. Otherwise the fan plate would sit directly on the graphics card. The screw ear, the screw slot and the tab stay in their standard position, so the cover fits the case normally. A gap of about 5 mm stays open in the slot opening next to the card – this is intended.

Design

  • Slot cover is 3 mm thick, stiffened by a 5 × 4 mm lip along its inner bottom edge (L profile). The screw ear is bent outward and has a side slot for the case screw. The tab that goes into the case recess is thin (1 mm), because it can't be done any other way.
  • A single leg comes from the middle of the cover and splits into a Y toward the fan frame. A rib on the leg adds stiffness.
  • Fan frame: 4 mm plate with a Ø114 mm airflow opening. All joints and corners are filleted.
  • The fan edge sits 50 mm from the cover. The fan plate starts 5 mm from the card, so the fan needs about 34 mm of space between the card and the CPU cooler.

Hardware

  • 4× M3 brass heat-set inserts, pressed in from the GPU side (holes Ø4.0 mm, 105 mm pitch).
  • 4× M3×28 screws through the fan. With M3×30 the tip would stick out about 1 mm on the GPU side.

Printing

  • Material: ASA.
  • Print flat on the fan plate. No supports needed.
  • Fusion 360 source (.f3d) is included, so you can adapt it to your own case and slot cover.

Notes

Check the fit against your own case before relying on it. Slot covers differ between cases.

Provided as is, without any warranty.

License

I'm sharing what I made – do whatever you like with it (remix, modify, sell prints), just credit me. (CC BY 4.0)

Tags