R8 Collet Holder - Modular
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.55 – €1.89 net (excluding VAT)
For file: R8ColletHolder03-.3mm - HolderX2_0.3mm_PETG_MK3S_1h38m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.72 excluding VAT (range midpoint).
- Weight reported by the author
- 25 g
- Print time reported by the author
- 1.63 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A collet holder which can grow as you add more collets
- Rating
- 0 / 5
- Likes
- 18
- Downloads
- 102
- Makes
- 0
- Views
- 493
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Public Domain
The idea for this “jigsaw puzzle” type holder is not original with me - I have seen the idea used in a number of other prints. However, I designed this particular print from scratch - it is not a copy or a remix.
The basic concept is pretty simple - print out one holder unit for each collet you have. The units can be connected linearly, in a square, a rectangle, or any other way you want to fit the pieces together. If you acquire more collets, simply print out additional units.
Features
- The jigsaw “knobs and sockets” are tapered to help the units lock together.
- The units are hollow to speed printing and reduce filament usage
- The units have a “bottom” so you can lift the holder along with the collets; the bottom is open in the center to reduce filament usage and make it easier to clean out swarf
Print Instructions
Print the units in PETG using the 3mf or gcode files provided. No doubt PLA would work also, but I did not try this. In general :
- print bottom down
- 0% infill
- 0.3mm layer height
I also tried printing in 0.2mm layer height, but there was little difference.
CAD
The OnShape 3D CAD files for this are here :