Mandamore v2 chamber filter (nevermore remix & evolution)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Designed a chamber filter for my Trident 300. It uses robot vac. pleated filters and is designed for granulated carbon
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 12
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- GNU General Public License v3.0
Designed a larger carbon + HEPA filter for my Voron Trident. This allows the granulated carbon to work much better and you get the advantage of a particulate filter.
Initially I started off with a completely unique design but then remembered that the nevermore housing works quite well... and you know why reinvent the wheel.
All the openSCAD files are included and reasonably well parameterized in case you want to use a different size filter. These were some of the cheapest I could find on AliExpress (filter in the assembly manual).
Material:
Whatever works for your chamber temp. I use ASA.
BOM:
Same as nevermore:
2x 5015 blowers
8x 6x3mm magnets (you can go to 12)
4x M3 inserts (optional but better, 1 for nevermore 3 for the housing)
1 6mm m3 screw (for the lid)
1 8mm m3 screw for the bracket connector
1 20mm m3 screw for the bracket connector
For additional parts:
3 8-10mm m3 screws for the latch
Carbon/Charcoal for filter (acid free)
1 Pleated filter