Universal RX Like toolhead - uses HGX Lite, LGX V0
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An RX like toolhead that uses multiple extruders. Dual filament switches and cutter.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 8
- Makes
- 0
- Views
- 87
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Credit where credit is due: based on this, I was not able to post as a remix. RX TOOLHEAD V5.5 using Bambu H2S/A1 gear & H2D Hotend
This is a pre-alpha release. Designed to mount an extruder with the LGX bolt pattern. Testing with my LGX spring conversion model. Note the parts included in this one are the HGX Lite version, you can download my model if you want dual filament switches or bolt on whatever you have. I have yet to put in the orbiter mounting points in. Marks have been added, but this will need its own lever.
Untested. Unprinted. Large headache warning, for those that want to be part of the development.
The cutter is known to work on the RX, I used the portions of the step from it. The switch mount is known to work, pulled from the HGX / LGX lite conversion step files. "It should" be straightforward at this point.
Why? There are two reasons for this, as a test platform and a very cheap alternative to those that have a pile of parts or extruders ready.