Capsule Tray 200 mm | Waves & Dunes
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A long capsule-shaped catch-all tray for jewelry, keys and small everyday items.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 2
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
Capsule Tray 200 mm | Waves & Dunes
Flavora.studio — Waves & Dunes
A long, shallow catch-all with rounded ends for jewelry, keys or small desk items.
Overall dimensions (X × Y × Z): 200 × 70.70 × 20.63 mm.
Print flat with the open side facing up. PLA is a starting option for dry indoor use.
FILES
One STL and one geometry-only 3MF at these dimensions, plus a print guide. The 3MF contains a mesh, without printer-specific profiles or G-code. The mesh was cleaned and passed digital manifold checks.
SUGGESTED STARTING SETTINGS
0.20 mm layers, 3 walls and 15% infill. Inspect the first layer and overhangs; add a brim if needed. These are starting points, not a tested print profile. Physical test printing is pending.
ABOUT
An original AI-assisted Flavora.studio design. The image is a render of the actual mesh, not a photograph of a physical print.
LICENSE
Creative Commons Attribution-NonCommercial 4.0 (CC BY-NC 4.0).