Foot Shim for CR-10 Control Box
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
My CR-10 Control Box does not sit level on my shelf and wobbles every time I hit the button, so I designed a shim to…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 9
- Makes
- 0
- Views
- 104
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
My CR-10 Control Box does not sit level on my shelf and wobbles every time I hit the button, so I designed a shim to put under one of the feet. It should account for a ~0.75mm distance, and almost perfectly levels my printer control box.
I printed it with the opening at the bottom and the point at the top. This allows it to not use any support.
Finer layer height, smoother surface, better fit (I used .12mm). Depending on your overhangs, I had a little bit of filament that I needed to take off using flush cutters so it would fit perfectly around the feet.
Category: 3D Printer Accessories