Gridfinity Bins for VMAN 100-in-1 Bit Case – Flat 5×3 or On-Edge 5×2, Stackable, 2 Colours
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Two stackable Gridfinity bins for the VMAN 100-in-1 ratchet bit case: flat (5×3, 60 mm) or on its edge (5×2, 120 mm).
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 1
- Makes
- 0
- Views
- 7
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution
What it is
Two stackable Gridfinity bins for the VMAN 100-in-1 ratchet screwdriver bit case. Lay the closed case flat in a wide bin, or stand it on its long edge in a narrower one that takes two thirds of the drawer space.
Features
Flat version: Gridfinity 5×3, 60 mm overall height, pocket 183 × 101 mm and 50 mm deep, plus an 18 mm strip behind for loose bits or the flexible shaft
On-edge version: Gridfinity 5×2, 120 mm overall height, slot 183 × 40 mm
1.5 mm clearance all round, finger notches at both ends
Standard stacking lip on both: any Gridfinity bins stack on top
Heights follow a 20 / 40 / 60 / 80 / 100 / 120 mm series: the flat bin plus 60 mm on top, or the on-edge bin alone, stays within 120 mm
Print settings
PLA or PETG, 0.4 mm nozzle, 0.2 mm layers, 15 % infill
No supports, no brim. Prints as shown, feet on the bed.
The 3MF files assign the colours: slot 1 red, slot 2 white. Red is a 0.6 mm inlay on the floor, three layers only.
Single colour: print the white STL alone.
Both bins fit a 250 × 220 bed together.
Notes
Case size: 180 × 98 × 37 mm, latch and hinges included, measured on a real case.
Update v2 (28 Oct 2026): v1 used the seller's size (180 × 96 × 32.2 mm) and the real case did not fit. v2 is sized on a measured case with 1.5 mm clearance; the on-edge bin grows from 5×1 to 5×2 cells to fit the 37 mm thickness. If you printed v1, please reprint.
Not affiliated with VMAN.
Designed with AI assistance (parametric Python script).
En français
Deux bacs Gridfinity empilables pour le coffret d'embouts à cliquet VMAN 100 en 1 (180 × 98 × 37 mm mesurés, fermoir et charnières compris ; v2 du 28/10, la v1 sur les cotes du vendeur ne rentrait pas) : à plat, 5×3 cases et 60 mm hors tout, empreinte de 183 × 101 mm et bande de 18 mm pour les embouts en vrac ou le flexible ; sur la tranche, 5×2 cases et 120 mm. Jeu de 1,5 mm, encoches pour les doigts aux deux bouts, lèvre d'empilement standard ; série de hauteurs 20 / 40 / 60 / 80 / 100 / 120 mm, pile ≤ 120 mm. Fond rouge en incrustation de 0,6 mm (emplacement 1), bac blanc (2), sans support. Sans lien avec VMAN.