Rat Rig V-Core 3 Cable Guide
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a remix of one of the parts used in Rat Rig V-Core 3 printers - the cable guide that holds the tool head loom…
- Rating
- 5 / 5
- Likes
- 16
- Downloads
- 132
- Makes
- 2
- Views
- 1,149
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
Edit 2024-Dec-13: check the new mount I designed that does the job as well and is more versatile: https://www.printables.com/model/1106659-ratrig-v-core-331-umbilical-mount
This is a remix of one of the parts used in Rat Rig V-Core 3 printers - the cable guide that holds the tool head loom on the frame side (the part from step 17 from the building guide here: https://ratrig.dozuki.com/Guide/01.+Frame+assembly/53?lang=en). Since it is fairly thin and the print orientation, the arm that bolts to the frame is rather weak. Design here addresses that by beefing up this part of the guide. Recommended print settings are 0.45 layer width, 0.2 layer height, 9 top and bottom layers, 4 perimeters, 25% infill (or denser) for strongest possible outcome. Print in PETG or ABS or better yet - polycarbonate if you are using enclosure.
Print Settings
Printer: Rat Rig V-Core 3
Rafts: No
Supports: No
Resolution: 200
Infill: 25
If you like my work - you can buy me a coffee :)
Category: 3D Printer Parts