1 / 7
Duet 1LC Toolboard mount for EVA carriage system with LGX extruder — image 1
1 / 7

Duet 1LC Toolboard mount for EVA carriage system with LGX extruder

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a mount used to attach Duet 3D 1LC toolboard to the EVA 3D carriage platform for MGN based 3D printers using…

Rating
5 / 5
Likes
1
Downloads
22
Makes
1
Views
476
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution

This is a mount used to attach Duet 3D 1LC toolboard to the EVA 3D carriage platform for MGN based 3D printers using the LGX extruder option. Mounts in place of the cable relief arm while retaining its functionality. Design draws inspiration from another mount also posted here, but has been built from scratch, rather than a remix. A lot easier to print as well (minimal supports required).

Printing: this part needs to be strong and rigid, print with 0.2mm layer height, 4 wall layers, 0.45mm layer width 9 top and bottom layers, 25% infill. Support is required for the main plate due to the overhand of the mounting arm.

I'm eventually going to add a protective lid, but still working out proper design as cooling might become an issue

Print Settings

Printer Brand:

Creality

Printer:

Ender 3

Rafts:

No

Supports:

Yes

Resolution:

200

Infill:

25

Filament: PolyMaker PETG/ABS/ASA/Polycarbonate

Notes:

PETG will be ok for non-enclosed printers. Poly Carbonate or other high temperature resistant plastics should be used for enclosed printers.

Post-Printing =============

clean 'sacrificial layers'

Holes for bolts have a sacrificial layer designed to trick the slicer to use bridging mode when printing and avoid need of placing small supports prone to causing problems while printing. Simply use a 3mm drill bit to clean these before assembly.

Category: 3D Printer Parts

Tags