ICOM IC-7300/IC-9700 stacking bracket
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Stacking bracket for ICOM IC-7300/IC-9700 transceivers. Wanted to be able to use the tilt foot on the lower radio.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 7
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
Stacking bracket for ICOM IC-7300/IC-9700 transceivers. Wanted to be able to use the tilt foot on the lower radio and a little more space between the units. This bracket (x4) provides the necessary stability and additional air gap.
Note the asymmetry: the top and bottom of the radio cases have different curve radii.
Use at your own risk. I designed this for a fixed spot. Would strongly encouragenot moving the radios in this configuration, nor using mobile.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
0.20mm
Infill:
20%
Notes:
Printed with four perimeters to get decent wall thickness.
Category: Electronics