Floppy Emu (rev. C) Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Of the available Floppy Emu cases, this one looks the most like something Apple might've produced. That said, it…
- Rating
- 5 / 5
- Likes
- 7
- Downloads
- 57
- Makes
- 1
- Views
- 566
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
Of the available Floppy Emu cases, this one looks the most like something Apple might've produced. That said, it needed some fixing to work with the new rev. C Floppy Emu with its MicroSD slot and OLED readout. The seemingly large hole in the right side is so you can swap cards without tools, unless your fingers are even fatter than mine. :) The hole for the display was also resized and brought closer to it, as I suspect the OLED is a fair bit thinner than the LCD used in older models.
Print Settings
Printer:
AM8
Rafts:
No
Supports:
No
Resolution:
0.2 mm
Infill:
20%
Filament:
AmazonBasics PLA
gray
Notes:
Print 1 each of the rev. C top and bottom and 4 of the buttons. Print all parts as oriented in the STLs. I'd recommend printing the buttons with skirts to improve bed adhesion. A bit of cyanoacrylate glue (or whatever's appropriate for the filament you're using) will hold it together when it's complete.
Category: Computer