Infimech TX Exhaust Filter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Exhaust Filter with HEPA and activated carbon for Infimech TX.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 13
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Open Community License v1.1
I created a carbon and HEPA filter for the TX. I used 2x5015 fans to help evacuate the air from the enclosure in the room.
The system features a modular approach with quick-release latches.
For the HEPA I settled on this ones and used 2 to get a bigger surface of 150x60mm.
The carbon bed is similar in size and gave it a 20mm depth, it holds about 120-150 grams of carbon so it should last a while.
The only hardware needed are 2 x M4x12 and nuts if it's used with my Top Hat, or M4x9 if used on the stock exhaust panel.
The 3mf is attached if someone wants to build it. I don't really know 3mfs work, I hope the settings are transfered properly.
The carbon housing has 2 additional objects inside it, one on it's face that needs not tops or bottoms and 18% zig-zag infill, and another inside that need no tops or bottoms and 8% hexagon infill.
Also there is a carbon catch thinghie that requires you to embed a mesh of sorts inside the print. I used some window insect netting and it works great. This parts goes over the carbon and should stop it from falling out.
I printed everything from PETG for a bit higher temp resistance.