Anet A8 Quick-Change Spoolholder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This mashup of two existing designs speeds up filament changes. No fasteners need to be done or undone; just slide the…
- Rating
- 5 / 5
- Likes
- 6
- Downloads
- 65
- Makes
- 1
- Views
- 466
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
This mashup of two existing designs speeds up filament changes. No fasteners need to be done or undone; just slide the spool onto or off of the roller. Bearings minimize friction in the roller.
Print Settings
Printer Brand:
Anet
Printer:
A8
Rafts:
No
Supports:
No
Resolution:
0.2 mm
Infill:
20%
Filament: 3D Solutech PLA real green & real blue
Notes:
Print the spool holder and the 70-mm roller (the 96-mm roller is too long). Insert 608ZZ bearings in the ends of the roller.
Mount the spool holder over the left side of the frame through; you'll probably need to replace the original screws with longer screws.Use the M8 threaded rod, nuts, and washers from the stock A8 spoolholder: bolt it to the new spoolholder with most of the length facing forward, then slide the roller onto the rod and secure it with a nut.
Category: 3D Printer Accessories