SCX24 Straight Control Arms Modifiable
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
SCX24 Control Arms set to JT length but easily modifiable.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 2
- Makes
- 0
- Views
- 11
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
SCX24 Control Arms set to JT length but easily modifiable. PETG has been the best material for building these in my experience. PLA and ABS have been too rigid to insert the pivot ball.
I have included an f3d file to make these very easy to modify to what you need.
To easily modify the length of these control arms you can use parameters by clicking the Modify drop down under solid and then selecting change parameters at the bottom of the drop down.
LCA stands for Lower Control Arm
UCA stands for Upper Control Arm
See my posted pictures for the easiest way to modify the length of control arms.