Closet maid wall brackets for the clothes hanger version (angle and straight)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Closet maid wall brackets for the clothes hanger version (angle and straight)
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 4
- Makes
- 0
- Views
- 22
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bedroom
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Closet maid and Everbilt brands of wall brackets for the clothes hanger and shelf versions (tested on closet maid 12" #37300, 4718 & everbilt 12") (angle and straight). The short ones are for shelf version.
I needed brackets that were at a 22 degrees and wanted to brace the center and end of the shelf from the ends of the shelf.
locked in versions hold good if you cut it where there is only two rods at the end, if you are close or at the vertical brace use the U-plate. It is a pain to install, they need to be on the shelf before install, or you need enough room to slide the shelf into the wall plate from the end not the top (crazy good support of the hanger shelf wires).