1 / 1
Paint can sawsall shaker
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Paint can sawsall shaker Dual Mount
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 13
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Public Domain
Only a few things are needed to create this!
(2x) 3 inch worm drive hose clamp.
Use a high quality clamp, cheap ones seem to strip lots.
(1x or 2x) Sacrificial saw blade
Optional grind the blade teeth off. Seemed to stay mounted better without teeth.
Once model is printed, slide the print over the blade and mark the hole locations. Remove print and drill the three ¼-inch holes.
(3x) ¼-inch screws, 1 inch long.
EX: ¼ x 20.
(3x) ¼-inch nuts, matching screw thread.