1 / 3
Planetary Gear Stand, but it spins itself for you. — image 1
1 / 3

Planetary Gear Stand, but it spins itself for you.

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Look I don't remember why I made this, but hey it mostly works so here

Rating
0 / 5
Likes
3
Downloads
4
Makes
0
Views
84
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Share Alike

THIS MECHANISM SPINS ITSELF FOR YOU (or not. your choice)

I don't know what came over me to make this but it mostly works so here, have this!

Planetary gear mechanism I made (that this stand is made for) here

ASSEMBLY INSTRUCTIONS

  1. Import the .step file or use the OnShape link here to edit the motor slot and bevel gear inserts to your desired motor (or just use the models below if it's compatable or you don't want a motor attached)

  2. Print 2x bevel gears (if you are attaching the motor), 1x base, and 1x planetary gear mechanism 

  3. If you are using a motor, place it into the hexigonical slot and run the wires through the slot on the bottom, then press one bevel gear into the hole of the planetary gear mechanism and the other over the motor. 

  4. Slide the planetary gear mechanism into the slot until it A. lines up with the bevel gears and/or B. snaps into place. 

  5. Congrats! You now have a stand!

NOTES FROM THE AUTHOR

  • Don't print this in TPU. Just don't. It will fall apart. 

  • The original design was made for a 3.1cm diameter circular motor with a 1.22 cm pitch circle 12 tooth gear on top. If this is not the motor you want to use, adjust the files below (or the onshape file above) to be compatable.

  • Thanks to my engineering teacher for handing me a broken motor for this lol

Going insane, 

Frog Dude (he/they)

Tags