Gridfinity Dymo LetraTag Cartridge Holder (Parametric)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Gridfinity bins filled with as many Dymo LetraTag cartridges as fit, with an optional staggered layout.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 4
- Makes
- 0
- Views
- 12
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Gridfinity bins for Dymo LetraTag label cartridges. Set the grid size and the OpenSCAD script fills it with as many cartridges as fit.
The pocket keeps the shape of ohuf's holder: 55 x 17 x 23 mm, a 20 mm rounded bottom, and the vertical notch for the cartridge nub. Outer pockets engrave that notch into the bin wall without cutting through it.
Two layouts:
Aligned: every cartridge faces the same way.
Staggered: neighbouring rows face each other and every other row shifts by 7 mm (62 mm back to back), so the colour label stays visible and the cartridges are easier to grab.
Included STLs, all 5 Gridfinity units tall plus the stacking lip:
2x1, 2 cartridges (tested)
2x3, 8 cartridges (tested)
3x6, 26 cartridges (not tested, even I don't own that many)
Each size is included in both layouts. Print the 2x1 first to check the fit, and raise cartridge_clearance if a pocket is tight.
The .scad file needs the modules folder from Gridfinity Extended OpenSCAD next to it:
https://github.com/ostat/gridfinity_extended_openscad
Credits:
Cartridge pocket by ohuf, Customizable Dymo LetraTag Holder, CC BY-NC-SA 4.0
Bin body from Gridfinity Extended OpenSCAD by ostat
Gridfinity system by Zack Freedman, https://www.voidstarlab.com/
This model was made with AI assistance. License: CC BY-NC-SA 4.0.