1 / 5
8-Bit Pixel Yoshi Egg Piggy Bank - multicolour without AMS, euro coin slot, no supports — image 1
1 / 5

8-Bit Pixel Yoshi Egg Piggy Bank - multicolour without AMS, euro coin slot, no supports

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Yoshi's spotted egg, drawn pixel by pixel, that keeps your coins safe.

Rating
0 / 5
Likes
0
Downloads
1
Makes
0
Views
6
Reviews
0

Updated at source:

Model information

Category
Home Decor
License
Standard Digital File License

Yoshi's spotted egg, drawn pixel by pixel, that keeps your coins safe. 14 x 16 pixels in white, green and black, with the coin slot on top of the egg and every green spot as its own part.

3 colours (black, green, white) without an AMS. Every colour is its own flat part: the inserts press into pockets in a black base, the way the pixels sit in the sprite. One filament per plate, no colour changes, no supports.

Euro coins in, coins out without breaking it. The 27.5 x 3.2 mm slot on top takes every euro coin and folded banknotes, and a 42 x 36 mm hatch at the back lets you empty it. Two hatches are included - print the one you prefer: four small screws, or a snap fit with no screws.

Checked before export. All meshes are closed and slice without repair, and the parts were checked for collisions in their assembled position: 0 mm3 of overlap. The front panel has a lip that drops inside the body, so it centres itself when you glue it.

What's in the download

  • 01_Body.stl - black - 132.5 x 150 x 40 mm - 9 h 35 min, 102 g

  • 02_Front_panel.stl - black - 132.5 x 150 x 2.7 mm - 2 h 19 min, 26 g

  • 03_Black_base.stl - black - 122.5 x 140 x 3.6 mm - 3 h 02 min, 35 g

  • 04_Insert_1_white.stl - white - 104.8 x 122.3 x 2 mm - 1 h 11 min, 13 g

  • 05_Insert_2_green.stl - green - 26.1 x 34.8 x 2 mm - 0 h 10 min, 2 g

  • 06_Insert_3_green.stl - green - 26.1 x 34.8 x 2 mm - 0 h 09 min, 2 g

  • 07_Insert_4_green.stl - green - 43.6 x 43.6 x 2 mm - 0 h 20 min, 4 g

  • 08_Insert_5_green.stl - green - 26.1 x 34.8 x 2 mm - 0 h 09 min, 2 g

  • 09_Insert_6_green.stl - green - 26.1 x 34.8 x 2 mm - 0 h 08 min, 1 g

  • 10_Hatch_with_screws.stl - any colour - 49 x 43 x 2 mm - 0 h 27 min, 5 g

  • 11_Hatch_snap_fit_no_screws.stl - any colour - 46 x 45 x 6.8 mm - 0 h 37 min, 7 g (alternative)

Plus a 3MF per colour plate, a small fit test and a colour map. Print only one of the two hatches.

Printing

PLA, 0.2 mm layers, 15 % infill, 4 perimeters. Every part prints flat, face down, no supports. Use a 3 mm brim on the smallest insert (09): it is too small to hold the bed alone. About 17 h 31 min and 191 g in total. The files are already oriented - do not rotate them.

Print the fit test first: three inserts at 0.17, 0.25 and 0.33 mm. The model uses 0.25. If another one fits your printer better, ask and I will send that version.

Assembly

  1. Press the colour inserts into the black base (a drop of glue makes them permanent).

  2. Glue the black base onto the front panel.

  3. Glue the front panel onto the body - the lip centres it.

  4. Close the back with the screw hatch (four 3 mm self-tapping screws, 6-8 mm) or the snap-fit hatch. Print the snap-fit hatch in flexible TPU: in PLA it is too stiff and needs far too much force. PLA is fine for the screw hatch.

Size

132.5 x 150 x 40 mm.

Tags