1 / 1
Volkswagen MK5 FSI 2.0 Turbo Cold Air Intake O.S Pipe  70 mm - 90mm — image 1

Volkswagen MK5 FSI 2.0 Turbo Cold Air Intake O.S Pipe 70 mm - 90mm

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

High-flow, custom oversized cold air intake system designed specifically for the 2.0T FSI (BPY) engine

Rating
0 / 5
Likes
2
Downloads
1
Makes
0
Views
74
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution — Noncommercial — NoDerivatives

High-flow, custom oversized cold air intake system designed specifically for the 2.0T FSI (BPY) engine found in the 2005–2010 Volkswagen Jetta GLI and GTI with the rear-mounted factory MAF sensor location near the turbo inlet pipe.

This modular kit scales up the main crossover piping to 90mm (3.5") while stepping back down to 70mm (2.75") at the MAF housing section to preserve factory air-mass sensor scaling and prevent lean fault codes. It concludes with a custom velocity stack transitioning directly up to a 6-inch (148.5mm ID neck) performance cone filter.

Included Files

  • MK5 FSI BPY intake and MAF inlet.stl – Rear inlet elbow incorporating the MAF sensor housing.

  • 70mm post MAF to 90mm CAI Pipe.stl – Step-up reducer transition pipe from 70mm MAF to 90mm main run.

  • 90mm tube for MK5 CAI (3mf/stl) – 90mm modular crossover tube sections (print 3 pcs).

  • 90 mm elbow for MK CAI.stl – 90-degree bend pipe.

  • 90mm to 148.5 mm - Velocity Stack.stl – High-flow velocity stack adapter for 6" cone filters.

Print Specs & Material Recommendations

  • Material: ASA-CF (Carbon Fiber ASA) strongly recommended for under-hood heat resistance, UV protection, and dimensional stability.

  • Heat Protection: Recommend wrapping finished intake sections in Gold Reflective Heat Tape / Shielding to minimize heat soak from the exhaust manifold and engine bay.

  • Nozzle: 0.6mm Hardened Steel.

  • Walls: 4 Perimeter Wall Loops (solid walls, no internal infill needed).

  • Infill: 0%.

DISCLAIMER:

For Test & Tune use only.

Original design – Not for Re-Sale.

Tags