Synaptics CoralBoard Development Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This case is designed for the new Synaptics Coralboard from Google Research.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 3
- Makes
- 0
- Views
- 74
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is my entry for the Synaptics Coralboard competition.
It is an ultra versatile development case that safely houses the main board and allows access to all the ports and sockets.
It features a protective lid that lifts up to gain access inside, TPU non-slip feet and threaded inserts on all sides to allow add-on parts to be fastened to the case.
The add-on extras that I have designed for the case so far are side frames that lift and tilt the case forward, and a rear bracket to allow the case to hang on a wall.
Additional hardware required:
- 4x M3 x 16mm countersunk bolts
- 2x M3 x 16mm button head bolts
- 19x M3 short heat inserts
Side brackets will require 4x M3 x 12mm countersunk bolts.
Rear hanging bracket will require 2x M3 x 12mm countersunk bolts + 2x M4 bolts for the wall.
Enjoy!