FlexBrew Drip-Catching Cup Stand / Basin (Hamilton Beach)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A proper stand to catch your spills and drips
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 12
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
FlexBrew Drip-Catching Cup Stand
Ever forget to put your cup under the single-serve side of your coffee maker? I did—and discovered that coffee can hit the original stand’s grille and splash all over the counter.
This replacement stand is designed to help contain that mess. It combines a cup stand with a basin underneath a removable grille. If you forget your cup, the opening in the grille gives the coffee a path into the basin.
Features
- One-piece basin: The floor and walls print together to catch liquid.
- Three interchangeable grilles: Choose a small, medium, or large center opening. The larger openings give an off-center stream more room to pass through.
- Removable grille: The grille rests on an integrated ledge, flush with the top of the stand. Lift it out through the center opening to empty and rinse the basin.
- Locating notches: Two notches on the underside accommodate the locating feature in the coffee maker and help keep the stand in position.
- No hardware: The grille simply drops into place—no screws or glue.
- Familiar size: The stand is approximately the same size and height as the original. Choosing a grille The small opening leaves the most material under your cup. The medium and large openings provide more room for the coffee stream to pass through. The best choice depends on where your machine dispenses and the size of your mug.
Check that your mug sits securely on the grille you choose, particularly with the larger opening. Test the assembled stand with water to see how well it catches the flow, and check the printed basin for leaks before relying on it. Printing Print the basin upright, with its bottom on the build plate. Use small removable supports for the two underside notch recesses. Print your chosen grille flat; it is a separate piece.
The stand was designed for my Hamilton Beach FlexBrew. FlexBrew models may differ, so check the fit against your machine before relying on it. Select a material and print settings suitable for the temperature of the liquid and your cleaning method.
The aluminum drip cup I use was purchased on amazon here: https://a.co/d/01fdbzAQ
Video demonstration
See how the stand fits the FlexBrew, how to remove the grille and empty the basin, and how the three grille openings compare:
Category: Kitchen & Dining