Xmas Star VaseMode
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
VaseMode Star. Use a brim with 2 to 5 outlines. Print 2 pieces in vasemode. Carv out the end of the "shaft" to fit the…
- Rating
- 5 / 5
- Likes
- 11
- Downloads
- 85
- Makes
- 1
- Views
- 429
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
VaseMode Star.
Use a brim with 2 to 5 outlines.
- Print 2 pieces in vasemode.
- Carv out the end of the "shaft" to fit the top of the tree or Tea light.
- Glue the 2 half together.
One model for LED-Tea-Light with big shaft.
One model for Xmas tree top with smaller shaft.
One model without a shaft for creative use.
For thicker wall with 0.4 mm nozzle, use 0.14 mm level height and Extrusion Multiplier: 1.4 and Extrusion Width: 0.60. Se picture for Siplify 3D sliser adjustment.
Tip:
You can always scale it in your sliser to fit your needs.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
0.14
Infill:
0%
Filament: Polymaker Polyflex PLA or PETG Clear or white Post-Printing =============
Vasemode
Category: 3D Printing