X-mas tree for LED Vasemode
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
X-mas tree.Important. In vasemode, use 0.1 mm layer height. If you use 0.2mm layer height, the tree wil fall apart…
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 82
- Makes
- 0
- Views
- 536
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
X-mas tree. Important. In vasemode, use0.1 mm layer height.
If you use 0.2mm layer height, the tree wil fall apart while printing.
There is also one STL file for tree in regular mode printing, but vasemode version will give a better result.
Use a 3 layer brim in vasemode. for at least 15 outlines and no top and bottom layer.
The top star isNOT vasemode. It need good support.
Print Settings
Printer Brand:
Creality
Printer:
Ender 5
Rafts:
No
Supports:
Yes
Resolution:
0.10
Infill:
0%
Filament: Polymaker Polyflex PETG or PLA clear, clear green and yellow for top star
Category: 3D Printing