Case for Funduino Cube
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Shell case for Funduino Cube. This Version does not need headset inserts. instead normal Hex-M3 nuts are used.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 3
- Makes
- 0
- Views
- 18
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Engineering
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Inspired by this nice case . Instead of the inspiration we used normal M3 nuts so no hetead inserts are needed. Just normal Hex M3 Nuts inserted from the back. On the back there is also a cutout so the QR code on the PCB's back is still visible.
Beside the printed part you will need:
5x M3 screw 5mm or 6mm. Head to your liking. Is used Socket heads
5x M3 hex nut
Press the Nuts into the hex pocket from the back and screw the screw in. There might be some force need to push the nut in, depending on you printer tolerances.
Bigger printer (Prusa mk3/mk4, core one, similar or bigger) is needed. case is approximately 22 x 15.5 cm (8,5 x 6,25 inch).