Pegboard Stick Electrode Quiver Rack (14″ SMAW)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Three vertical quiver tubes for 14″ stick electrodes on ¼″ pegboard with L-hook pins.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 1
- Makes
- 0
- Views
- 6
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Pegboard-mounted triple quiver for SMAW stick electrodes. Rods stand nearly vertical with ~120 mm of tube support; 14″ (355.6 mm) sticks extend above the rack.
Key dimensions:
Tube IDs: Ø24 / 28 / 32 mm (≈10–15 rods of 3/32″, 1/8″, 5/32″)
Tube height: 120 mm support sleeve
Pegs: Ø5.5 mm L-hooks for ¼″ holes on 1″ centers; hooks catch behind ⅛–³⁄₁₆″ board
Assumptions: standard 14″ electrodes; ¼″ pegboard.
Print: PETG, 0.2 mm, 4 walls, 25–30% infill. Print with L-hooks pointing UP (bottom edge on bed) — no supports. Do not lay the back flat (hooks would need supports).