Tirador de Tracción para Puerta/Ventana de PVC (Tornillos 2mm) / PVC Window Pull Handle for Hinged Doors (2mm Screws)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Tirador ergonómico para puertas o ventanas de PVC de bisagra sin pomo exterior. Fijación fuerte con 2 tornillos de 2mm.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 1
- Makes
- 0
- Views
- 15
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
[ESPAÑOL]
Un tirador funcional, ergonómico y de alta resistencia diseñado específicamente para puertas o ventanas de PVC con apertura de bisagra (practicables) que no disponen de pomo en la cara exterior. Permite tirar de la hoja cómodamente desde fuera para cerrarla o arrimarla con total seguridad.
Características del diseño:
Anclaje Mecánico de Alta Resistencia: Cuenta con dos guías avellanadas preparadas para fijar el tirador directamente al perfil de PVC mediante dos tornillos rosca chapa (rosca plancha) de 2 mm, soportando perfectamente la fuerza de tracción frontal necesaria para vencer la presión de las gomas de la ventana.
Optimizado para PLA: La geometría de la pieza distribuye el esfuerzo hacia la base atornillada, evitando que el plástico sufra fatiga estructural o se agriete por los tirones diarios.
Ergonomía Limpia: Las cabezas de los tornillos quedan totalmente embutidas (enrasadas) en el cuerpo del tirador para ofrecer un tacto suave y cómodo al usarlo.
Parámetros de impresión recomendados:
Material: PLA (Probado con éxito para este uso mecánico).
Altura de capa: 0.2 mm.
Perímetros (Paredes): Mínimo 4 o 5 perímetros. Es el parámetro más importante: necesitas que la zona que rodea los agujeros de los tornillos sea completamente sólida para que la cabeza del tornillo no rompa el plástico al apretar.
Relleno (Infill): 40% - 50% (Patrón Giroide o Cúbico para máxima resistencia a la tracción).
Soportes: No requiere (Diseñado para imprimirse plano sobre la cama).
[ENGLISH]
An ergonomic, heavy-duty functional pull handle designed specifically for hinged PVC doors or windows that lack an exterior knob. It allows you to comfortably and safely pull the window shut from the outside, overcoming the seal friction.
Design Highlights:
High-Strength Mechanical Anchor: Features two countersunk holes designed to secure the handle directly to the PVC profile using two 2mm sheet metal screws (self-tapping screws). It easily withstands the frontal pulling force required to overcome the window's rubber weatherstripping.
PLA Optimized: The structural geometry directs the tensile stress straight down into the screwed base, preventing plastic fatigue or cracking from daily use.
Flush Finish: Screw heads sit completely flush inside the handle body for a smooth, comfortable, and safe grip.
Recommended Print Settings:
Material: PLA (Fully tested for mechanical use).
Layer Height: 0.2 mm.
Wall Line Count (Perimeters): Minimum 4 to 5 walls. This is the most critical setting: it ensures the area around the screw holes is solid so the screw head won't crush or split the plastic during installation.
Infill: 40% - 50% (Gyroid or Cubic pattern recommended for high tensile strength).
Supports: Supportless design (Prints completely flat on the build plate).