1 / 2
LR44/PR44/675p Battery LED Lamp with Switch
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Residual Voltage or fresh Battery Lamp with embedded rotating switch
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 5
- Makes
- 0
- Views
- 16
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Turn the knob to switch the LED..
Initial OpenSCAD file created by Claude, then modified and adjusted by testing.
Assembly:
Select STL depending on Battery and LED Voltage.
bend cathode 90 degree
insert LED with anode to Front
bend cathode around bottom path.
You can place and solder additional wire or resistor here
insert cathode wire thru back
adjust wire so it does not touch the batteries
insert batteries
insert knob carefully, should be off when mark is in direction of LED