CQ Dexaline Hand Board MOD - Fiducial BB's
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replaces stock threaded bolts with 3D printed bolts housing BB's and Laser Crosshair Marks for easy setup
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 19
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Medical Tools
- License
- Creative Commons — Attribution — Noncommercial
The CQ Medical Dexaline Hand Board is a fantastic product for reproducible setup of hands for osteoarthritis LDXRT. (Though, as the original designer of the prototype, I am biased), however, there is one original design feature that was not carried forward to the final iteration -- It lacks fiducial BB's to define the CT isocenter for planning and as a starting shift point for daily treatment. The interim janky solution was to sticker some BB dots to the board.
This modification replaces the stock threaded bolts with 3D printed versions of the bolts that have a cavity to accept a BB of your choosing (anything <3mm will work -- I used #8 birdshot, though a standard sticker marker glued in place works fine). There are also crosshair scribes which can be used for daily laser alignment with or without a subsequent shift. The Y/Z planes are defined by the BB's in the side bolts, the X (midsag) plane is defined by the BB in the "bottom bolt".
Easy to print, use 3 or more walls with PLA or PETG. 0.2 mm layers are fine with the coarse threads. Note that the models contain a "MOD" volume which should be set as a modifier with a contrasting color for the laser crosshairs.