Bone Rattler! (Rain Noise Maker)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bone rattle, big bone that rattles with lots of mini bones. use a stiff material like PLA
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 9
- Makes
- 0
- Views
- 61
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Music
- License
- Creative Commons — Attribution
Please use a stiff material like PLA. Supports are needed on the outside of the bone ends, No supports for the middle bone part!
The Bone rattle, time to rattle some Bones with Bones!
With the inspiration of a rain maker instrument, here is the Bone rattle with smaller bones inside, or you can use rice or maybe smaller candy inside to make the noise.
Screw one end of the bone in place and fill the other end with the mini bones, or rice, before screwing it on, makes it simple and easy to assemble with less mess.
Should your bone be out of alligment, you can print the 1mm spacer and adjust for the twist. The thread is 4mm per turn, so print 1mm for 90 degrees, and scale accordingly.
The 100% sized Bone Rattler with ~50 mini-bones inside: