Firearms sign magnet for Pietta
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Pietta Firearms Brotherhood sign, Magnet, or plaque
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 2
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is a 3D version of the Pietta Firearms Brotherhood logo. Pietta is an Italian company that makes nice reproductions of many old west United States guns like the Colt's and Remington's used in the U.S. civil war and afterwards. Their guns are popular with cap and ball / black powder shooters.
This print is about 100mm x 72mm x4 mm. The 3mf has negative volumes (pockets on the back) for 5 magnets you can add if you want. I used 6x2 round magnets like these .
The 3mf has the colors in it for an MMU or INDX. It should be usable in other slicers with some tweaking. I used PLA in black, red, and white.
There is also a STL file if you want to mix it yourself. You will need to add the magnet holes if you use that one.
This was made using a picture converted with Inkscape to a SVG then converted to a STL. It is a little rough but I think it came out okay.
I have a Uberti sign here if you want one for them https://www.printables.com/model/1896459-uberti-firearms-sign-magnet
Note: This product is not associated with or endorsed by any brand mentioned in the description