JW Tract, Magazine and Card display
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Display stand for JW new tracts, cards and magazines. Please let me know if you have ideas to improve the design.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 5
- Makes
- 0
- Views
- 44
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Display stand for JW new tracts, cards and magazines. Please let me know if you have ideas to improve the design (especially the magazine stand - my MK4S is too small for that, so if you print it, please let me know what could be changed with the design).
Print the model, and then you can fill it with sand. To make it easier, there is a funnel that you can screw into the plug, then fill in the sand, and then close it with the plug. For me, the 0,96x size works best. Depending on how calibrated your printer is, you might want to use other sizes for the plug.
I printed it with fuzzy skin, because I like the effect - the 3mf is included. For the base, I used the Ikea Trixig.