Housing for SHT4x temperature/humidity sensors
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An enclosure for small (and cheap) I²C temperature & humidity sensors breakouts.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 9
- Makes
- 0
- Views
- 78
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
This enclosure is for miniature I²C temperature/humidity sensors breakout boards commonly found on chinese wholesale sites (such as AliExpress, probably also on Amazon).
These boards carry Sensirion SHT30/SHT35/SHT40/SHT41/SHT45 sensors.
There are several board sizes available, the current enclosure is designed for the smaller 13x11mm boards, that have the sensor on the front side, and all other components on the back.
(according to my real life measurements, the board is more 12.5x10.5mm).
Required hardware:
1x STH4x breakout board
1x M3x8 FHCS screw (flat-head countersunk)
1x small cable tie
1x mounting screw, if needed
The cable groove is sized for a 4x28awg cable, around 3mm in diameter.