1 / 5
New Year Wine Glass Charms - 8 Snap-On Champagne Glass Markers, Two-Color, No Supports — image 1
1 / 5

New Year Wine Glass Charms - 8 Snap-On Champagne Glass Markers, Two-Color, No Supports

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Eight snap-on charms for wine and champagne glass stems: white symbols on colour tags, flat print, no supports.

Rating
0 / 5
Likes
0
Downloads
2
Makes
0
Views
7
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

Never mix up glasses at a New Year's Eve or Christmas party again. Eight charms snap around the stem of a wine or champagne glass, each with its own white symbol: a star, a tree, a bell, a snowflake, a gift, a heart, a moon and "27". This set is our free gift for the community: print it for your party and have fun.

How it clips on. Every charm has a C-ring with rounded lips. The opening is about 5.6 mm, so you press the charm sideways onto the stem and it snaps around it. The ring is 8 mm inside: on a thin stem the charm hangs loose and turns freely, or slides down and rests on the foot of the glass, which is intended.

SIZE: 20 × 31 × 3.2 mm per charm: a round 20 mm tag, a 2.4 × 2.4 mm ring band, a symbol raised 0.8 mm.

What fits. Glass stems of 6-8 mm in PETG. In PLA use the charms only on stems up to 7 mm: a thicker stem bends a PLA ring past its limit and it can crack. Stems thicker than 8 mm do not fit.

Two colours with one filament change. The tag is 2.4 mm, the symbol sits on top from Z 2.4 to 3.2 mm. Insert a filament change at 2.4 mm (or use an AMS) and you get a white symbol on a coloured tag. Give every charm its own tag colour and nobody has to remember which glass is theirs. Without a change, the symbol stays readable as relief.

IN THE FILES

  • 1-star-single ... 8-27-single: 8 charms, one body each, already lying flat.

  • 3MF: all 8 on one plate.

  • champagne_glass_charms.scad: the parametric source. Change the stem size (stem_d), the ring opening (gap_w) or the symbol in the OpenSCAD Customizer.

PRINT SETTINGS: PETG (recommended) or PLA, 0.20 mm layers, 4 walls, 100 % infill, no supports, flat on the bed. Filament change at Z 2.4 mm for the white symbol. All 8 fit a 180 × 180 mm bed in a 4 × 2 grid (about 98 × 70 mm).

Honest notes:

  • The images are 3D renders made from the same files you print. The glass in the pictures is only a render prop. This set has not been test-printed yet.

  • Checked numerically: every file is a closed single solid, there are no overhangs and nothing starts in mid-air. Ring inside diameter 7.98 mm, opening between the lips 5.6-5.65 mm.

  • The stem range comes from a bending estimate, not a test: about 1.9 % ring strain on a 7 mm stem and about 3 % on an 8 mm stem. PETG takes that; PLA starts to crack near 2.5-3 %. That is why we recommend PETG.

  • The tips of the white star and moon are thin (about 0.4 mm) and may print slightly rounded.

  • Small parts: not for children under 3.

  • The design is original: no licensed characters, no brands. The "27" uses Liberation Sans (free licence).

Tags