Christmas Place Card Holders - Tree, Star, Bauble, Snowflake, Engraved Name Option
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Festive place card holders in 4 designs. Both parts print flat with no supports; optional engraved guest name.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 4
- Makes
- 0
- Views
- 22
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Winter & Christmas & New Year's
- License
- Creative Commons — Attribution — Noncommercial
Give every guest at your Christmas dinner their own little seat sign. Each holder is a small block with a slit for a name card, and a festive silhouette stands behind it: a pine tree, a star, a bauble or a snowflake. Mix all four along the table or print one design in many colours. This is our free Christmas gift to the community - enjoy it and share your makes!
Why it prints better. Many place card holders print the decoration standing up, so the tips of the star and the snowflake start in mid-air and need supports, or they snap off. Here both parts print flat: the block on its bottom and the silhouette lying down, so every point comes out clean. The silhouette then plugs into a slot in the block with a tab.
Sizes
Block: 46 × 18 × 9 mm. Card slit 1.2 mm wide and 6 mm deep, for place cards up to about 1 mm thick (normal card stock).
Silhouettes: 34-42 mm wide, 3 mm thick. Assembled, the holder stands 49-52 mm tall.
A good fit, not a loose one. The tab has 0.2 mm clearance per side across its thickness and 0.25 mm along its width, plus a 0.4 mm chamfer on its first layer, so elephant foot does not make it tight. The tree and the bauble sit on the floor of the slot, the star and the snowflake on top of the block.
Engrave a name (optional). Open the .scad file in OpenSCAD (or the Customizer) and type a name: it is engraved 1 mm deep on the front of the block, letters about 5.3 mm tall, in a bold font that also handles Polish letters like Ł. Names up to about 10 letters fit as they are; longer names are narrowed to 44 mm. For names over 11 letters, set name_size a little smaller (for example 4.8) so the strokes stay thick enough to print. You can also change the card slit width and the tab clearances.
In the files
xmas_place_card_holders-block-cream.stl- the block (print one per guest)xmas_place_card_holders-silhouette-tree-green.stlxmas_place_card_holders-silhouette-star-gold.stlxmas_place_card_holders-silhouette-bauble-red.stlxmas_place_card_holders-silhouette-snowflake-blue.stlxmas_place_card_holders.scad- the parametric source: design, name, slit and fit
Print settings: PLA, 0.20 mm layers, 3 walls, 20 % infill, no supports. Blocks print on their bottom, silhouettes lie flat. Colours are separate parts, so no AMS is needed: print the blocks in cream or white and each silhouette in its own colour. Every part fits even a small 180 × 180 bed; four blocks or four silhouettes fit on one plate side by side.
Assembly: Push the silhouette tab down into the slot at the back of the block, then slide the name card into the front slit.
Honest notes
The images are 3D renders made from the same files you print. The blank cards in one picture are only there to show the slit. This set has not been test-printed yet.
Checked numerically on the exported STLs: every part is one closed solid, there are no overhangs, nothing starts in mid-air, and every silhouette tab fits its slot with zero overlap (shifting it 0.3 mm across its thickness or 0.35 mm sideways already collides, so the clearance is as stated). Name engraving checked on exported blocks with ANNA and MAŁGORZATA: 1.0 mm deep, at least 4.2 mm of wall left to the card slit.
The design is original: no licensed characters, no brands.