Gridfinity 2x4 Deep Impact Socket Holder, 1/2" Drive, 13-17 mm
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€3.65 – €4.46 net (excluding VAT)
For file: module.gridfinity.2x4.deep.impact.socket.holder.bin.13-17.metric.1-2.drive.ratchet_0.4n_0.2mm_PLA_MK4S_2h18m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €4.05 excluding VAT (range midpoint).
- Weight reported by the author
- 87 g
- Print time reported by the author
- 2.31 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Gridfinity 2x4 tray for four deep 1/2" drive impact sockets, 17 to 13 mm, lying tilted. Size labels.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 1
- Makes
- 1
- Views
- 11
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Store your deep 1/2" drive impact sockets (17, 16, 15 and 13 mm) in a Gridfinity tray - lying at an angle, compact and easy to grab.
Gridfinity bin with a 2x4 footprint - it drops straight onto any standard Gridfinity baseplate. Part of Modula, my modular workshop tool storage system built on Gridfinity.
Grid size: 2x4 (Gridfinity squares)
Holds 4 deep impact sockets: 17, 16, 15, 13 mm
Each socket lies tilted 10 degrees, half sunk into a pocket shaped like the socket - deepest at the front, shallower at the back
Raised size label between the sockets, readable from the front
1/2" marker (12.7 mm square + text) in the lower left corner
Companion tray: Gridfinity 2x5 Deep Impact Socket Holder, 1/2" Drive, 18-24 mm - together they hold the complete 13-24 mm set.
Printing:
PLA, 0.2 mm (0.008") layers, 0.4 mm (0.016") nozzle, infill 10%, no support, no brim.
Print the tray as it is in the STL file (Gridfinity foot down on the bed). One part.
Optional: add a colour change at 21.2 mm (0.835") to get contrasting colours on the raised size labels and the 1/2" marker.
Credits:
Built on the Gridfinity system by Zack Freedman: https://gridfinity.xyz