Bat hangable decoration with articulated wings!
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a simple, easy to print bat with articulated wings.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 0
- Makes
- 0
- Views
- 6
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Autumn & Halloween
- License
- Open Community License v1.1
The model is intended to be printed in PLA, although any plastic should do.
You may choose either to print hollow or full wings, although both are fully filleted to avoid sharp points, and both are reversable, so do not need to be mirrored when printing
The wings are held on using printed pins which you must glue in place on the back once wings are in place using a hot glue gun, although, blu-tac may also work
The head has a circular hook which can be used to hang the decoration from branches or other places.
Since the model is only 10g in total, they are quick and easy to print, and you could likely print several at once due to their small size.
The pins are designed with a high diameter, which makes it far easier to print on lower end printer, and less likely to fail along the layer lines
Use the auto orient feature in slicer with all parts for best results
No parts require supports
Print 2x wings, 1x body and 2x pins for each bat
Happy Halloween Decorating!