ForgeStack Parts Bin 2×2 — Stackable Modular Bin, Support-Free
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The workhorse 80 × 80 mm ForgeStack parts bin — baseplate drop-in, stackable, label frame. Support-free.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 3
- Makes
- 0
- Views
- 12
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Garage
- License
- Creative Commons — Attribution — Noncommercial
The workhorse ForgeStack bin: 80 × 80 mm (2 × 2 cells), 50 mm tall — fasteners, fittings, electronic components, craft supplies. It drops onto a ForgeStack baseplate, stacks on its own kind, and carries a raised label frame on the front.
**Print details**
- Designed for support-free FDM printing. Slicer-validated (OrcaSlicer, 0.4 nozzle, 0.2 layer, PLA) — community printing in progress: be one of the first to print it and share your make!
- Footprint 80 × 80 mm (81.2 mm deep overall including the label frame), 50 mm tall; interior 74 × 74 mm, ~38 mm deep
- Four underside sockets drop onto baseplate pins — 0.5 mm clearance per side, no press-fit
- Stacks: the tapered plug base drops into the mouth of the bin below (0.5 mm clearance)
- Raised label frame on the front for a 54 × 24 mm paper label
- The ForgeStack system: every module is built on a 40 mm grid. Baseplates carry square locating pins (11 × 11 mm, 4 mm tall) at the cell centres; every bin underside has matching square sockets (12 × 12 mm, 4.5 mm deep) — a drop-in fit with 0.5 mm clearance per side, no press-fit, no hardware.
- Bins also stack: the tapered plug on the underside (51° flare, so it prints clean) drops into the open mouth of the bin below with the same 0.5 mm clearance per side.
- One honest note: the underside sockets have flat ceilings — a 12 mm bridge, crossed cleanly in PLA/PETG with normal part cooling. Print with supports OFF.
- Watertight/manifold mesh — slices clean in OrcaSlicer, Bambu Studio, PrusaSlicer, Cura
- Listing images are renders of the actual model geometry, not photos of a print — your Makes will be the first real photos
**Original design** — modelled from code, all rights reserved. The rest of the ForgeStack system is free on my profile too: baseplates in 3×2 and 4×4, bins in 1×2, 2×2 and a divided 2×3, a 1×1 pen cup module, a hanging bin and its wall rail — plus the Desk Cable Clip, the Modern Ribbed Planter Pot, the Stackable Storage Box and the Square Dice Tray. Every one of them support-free.
**License:** CC BY-NC 4.0 — free for personal use: print as many as you like for yourself and as gifts. No selling of prints, and no redistribution or sharing of the files.