ForgeStack Hanging Bin — Wall-Rail Modular Bin with Keyhole Slots, Support-Free
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
ForgeStack bin that hangs on two screws or the Wall Rail — and drops onto the baseplate too. Support-free.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 4
- Makes
- 0
- Views
- 14
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Garage
- License
- Creative Commons — Attribution — Noncommercial
The ForgeStack bin that hangs: an 80 × 40 mm bin (2 × 1 cells) with a tall back panel and two teardrop keyhole slots, 40 mm apart — the system pitch. Drop the slots over two screw heads on a wall or on the ForgeStack Wall Rail and the bin hangs at the bench edge, off the surface. On the desk instead? Its underside has the standard ForgeStack sockets, so it drops onto a baseplate like every other bin.
**Print details**
- Designed for support-free FDM printing. Slicer-validated (OrcaSlicer, 0.4 nozzle, 0.2 layer, PLA) — community printing in progress: be one of the first to print it and share your make!
- Bin: 80 × 40 mm footprint (41.2 mm deep overall including the label frame), 55 mm tall body; interior 74 × 34 mm, ~43 mm deep
- Back panel rises to 110 mm with two teardrop keyhole slots (12 mm round section) exactly 40 mm apart
- Hangs on two screws with heads up to ~11 mm — on a wall, a pegboard screw pair, or the ForgeStack Wall Rail
- Two underside sockets drop onto baseplate pins — 0.5 mm clearance per side, no press-fit
- Raised label frame on the front for a 54 × 24 mm paper label
- The ForgeStack system: every module is built on a 40 mm grid. Baseplates carry square locating pins (11 × 11 mm, 4 mm tall) at the cell centres; every bin underside has matching square sockets (12 × 12 mm, 4.5 mm deep) — a drop-in fit with 0.5 mm clearance per side, no press-fit, no hardware.
- One honest note: the underside sockets have flat ceilings — a 12 mm bridge, crossed cleanly in PLA/PETG with normal part cooling. Print with supports OFF.
- Watertight/manifold mesh — slices clean in OrcaSlicer, Bambu Studio, PrusaSlicer, Cura
- Listing images are renders of the actual model geometry, not photos of a print — your Makes will be the first real photos
**Original design** — modelled from code, all rights reserved. The rest of the ForgeStack system is free on my profile too: baseplates in 3×2 and 4×4, bins in 1×2, 2×2 and a divided 2×3, a 1×1 pen cup module, a hanging bin and its wall rail — plus the Desk Cable Clip, the Modern Ribbed Planter Pot, the Stackable Storage Box and the Square Dice Tray. Every one of them support-free.
**License:** CC BY-NC 4.0 — free for personal use: print as many as you like for yourself and as gifts. No selling of prints, and no redistribution or sharing of the files.